2025-12-11 / Version 36 r01
Orange marked part on the overview below was updated.
- Slicing error on ejector housing was fixed. @Cristian R: Thank you for reporting.
2025-12-08 / Version 36
All orange marked parts on the picture were updated.
- Joints between Magazine parts where adjusted to address tolerance issues.
- Feet of the Magazin and Ejector unit become shortened. High of the feet still can be adjusted individually if needed using a screw.
- Gripper mount improved to better fit to different A1 printer series.
- Gripper hook was reoriented in order to get more strength in Y direction.
- Gripper "fins" (thin features that are supposed to be wedged between the springsheet and the heatbed) has become thinner in order to address issues with some series D printers.
- User manual got a part list on page 2.
- Self-test and next-plate files were updated to ensure BambuStudio 2.4.0.70 compatibility.
- Self-test and next-plate files now are also available for OrcaSlicer. (see online accessories)
2025-11-27 / Version 34 r02
"Accessory" folder added (accidentally forgotten in v34 r01)
2025-11-13 / Version 34 r01
PDF file compressed to reduce download-file size.
2025-11-04 / Version 34
All orange marked parts on the picture were updated.
- New hook design (IMPORTANT UPDATE)
- Lower design to address collision with the part-fan shroud
- Spike-features for better stack stability
- Slot-feature at the back as a counterpart to the lead on the ejector unit
- Slot-feature at the front for more reliable usage with rails
- Some custom hooks added (type F and V)
- Rails and drilling jig are moved to web resources
- Ejector unit adjusted
- Feature added to improve the tolerances
- Mounting clip redesigned
- Foot added
- Screw domes at feet to adjust high with a screw
- Front part printed in different orientation to reduce friction
- Front part contains a lead as a counterpart to the hook's slot-feature at the back-side
- Lever part slightly shortened to address tolerance issues.
- Magazine
- Improved backstop magnet slots
- Big step divided into multiple small steps, to reduce noise and improve stack stability
- Screw domes at the back to attach addons
- Screw domes at feet to adjust high with a screw
- Gripper
- shortened to prevent collision with the part-fan shroud
- Next-plate file
- added M17 Z0.3 line to reduce noise and protect the stepper when executed while printer don't have home position (after power outage for instance)
- Self-test file
- new sequence were used here (see app update from 2025-11-03)
2025-11-03 / app Version 25
New, slightly modified GCODE sequence for plate change. Slowed down in some critical stages, adjusted movements.
- G0 Y20 F2000 --> G0 Y10 F2000
- added G90 at the beginning
2025-10-11 / Version 31
Custom support added
2025-10-01 / Version 30
Initial JobOx A1 release