Zu Produktinformationen springen
1 von 4

jobox shop

JobOx A1 (DOWNLOAD) - Plattenwechsler für Bambulab A1

JobOx A1 (DOWNLOAD) - Plattenwechsler für Bambulab A1

Normaler Preis €55,00 EUR
Normaler Preis Verkaufspreis €55,00 EUR
Sale Ausverkauft
inkl. MwSt. Versand wird beim Checkout berechnet

English Version below

 

JobOx A1: Der Bambulab A1 Plattenwechsler

Was ist der JobOx A1 Plattenwechsler und wie funktioniert er?


JobOx A1 ist ein Automatisierungs-Add-on, das speziell als Bambulab A1 Plattenwechsler entwickelt wurde. Es verleiht Ihrem Drucker die Fähigkeit zum Seriendruck und ermöglicht eine weitgehende Automatisierung des Bambu lab A1. Nach Abschluss eines Drucks entlädt das System die fertige Druckplatte automatisch und ersetzt sie durch eine neue aus dem Magazin. So können Sie mit diesem A1 Plattenwechsler mehrere Aufträge nacheinander drucken oder einen Auftrag beliebig oft wiederholen – vollautomatisch. Das System bleibt dabei mit AMS kompatibel.

Wie viele Platten fasst das Magazin des A1 Plattenwechslers?


Es wird empfohlen, bis zu 8 Platten im Magazin zu verwenden. Bei einer höheren Anzahl sollte der Stapel beobachtet werden, da es beim Ladevorgang zu Fehlausrichtungen kommen kann. Für eine effiziente Automatisierung des Bambu lab A1 ist eine große Plattenanzahl jedoch oft nicht nötig, da entladene Platten während des laufenden Druckbetriebs einfach gereinigt und dem Magazin wieder hinzugefügt werden können.

Was erhalte ich beim Kauf dieses Bambulab A1 Plattenwechslers?


Dieses Zubehör ist ein digitales Produkt. Sie erhalten nach dem Kauf Zugang zu allen Druckdateien, die Sie für den Bau dieses Add-ons benötigen. Der besondere Vorteil: Das gesamte System des A1 Plattenwechslers arbeitet passiv, ohne zusätzliche Motoren oder Elektronik! Die benötigten Kunststoffteile drucken Sie einfach mit Ihrem A1-Drucker. Die einzigen externen Teile sind:

*   🧲 **D10 x 3 mm runde Magnete** - 12 Stk.
*   🔩 **M3 x 10 mm Innensechskantschrauben** - 5 Stk. (+6 Stk. pro Platte)

Ist der Aufbau des A1 Plattenwechslers kompliziert?


Nein, der Zusammenbau ist ein einfaches und unterhaltsames Projekt. Eine detaillierte und gut bebilderte Anleitung führt Sie Schritt für Schritt, sodass der Bambulab A1 Plattenwechsler in wenigen Minuten montiert ist. Ein kurzer Selbsttest vor dem ersten automatisierten Druckjob stellt sicher, dass die Automatisierung des Bambu lab A1 wie erwartet funktioniert.

Benötige ich spezielle Software für die Automatisierung?


Sie nutzen weiterhin Ihren gewohnten Slicer. Der einzige Unterschied: Die geslicte Datei wird vor dem Senden an den Drucker kurz durch unsere Web-App konvertiert. Dort können Sie die Druckreihenfolge ändern, Wiederholungen festlegen und eine komplette Druckwarteschlange für die Automatisierung des Bambu lab A1 erstellen. Die App läuft in jedem Browser, erfordert keine Installation und Ihre Daten bleiben lokal auf Ihrem Computer.

Wie erhalte ich technischen Support?


Wir bieten keinen persönlichen Support an. Sie erhalten jedoch Zugang zu unserem Discord-Server, wo Sie sich mit der Community austauschen können. Zusätzlich hilft Ihnen ein Troubleshooting-Guide auf unserer Website bei der Lösungsfindung.

Wie sicher ist die Nutzung eines A1 Plattenwechslers?


Dieser Bambulab A1 Plattenwechsler wurde intensiv getestet, um Fehlerquellen zu minimieren. Die aktuelle Version ist sehr zuverlässig, aber kein System ist 100% perfekt. Es besteht ein geringes Restrisiko für Fehler beim Laden und Entladen. Meist stoppt der Drucker durch die Kollisionserkennung ohne Schaden. Theoretisch sind aber Schäden am Drucker oder an den Bauplatten möglich. Die Nutzung einer solchen Automatisierung für den Bambu lab A1 sollte, besonders am Anfang, beaufsichtigt werden.

Wichtig:

Die automatische Plattenerkennung Ihres Druckers funktioniert bei der Nutzung des A1 Plattenwechslers möglicherweise nicht zuverlässig. Sorgen Sie stets für ausreichend Platten im Magazin.

Beeinträchtigt die Nutzung eines A1 Plattenwechslers die Garantie?


Ja, die Verwendung dieses Add-ons kann zum Erlöschen der Herstellergarantie führen, falls ein Schaden dadurch entsteht. Das Handbuch des Bambulab A1 verbietet das Platzieren von Objekten hinter dem Drucker. Die Installation und Nutzung eines Bambulab A1 Plattenwechslers erfolgt daher vollständig auf eigene Verantwortung. Auch die Geräte-Zertifizierung kann bei einem modifizierten Drucker nicht garantiert werden.




What is it and how does it work?

JobOx A1 is an automation add-on designed for BambuLab A1 printer, which gives it a capability of serial print. After the print is finished the plate becomes automatically unloaded and replaced by the new one from the magazine, located behind the printer. In this way you can print multiple print jobs automatically one after another or reprint the same job multiple times.  All this happens automatically. The system is compatible with AMS and you can still use your favorite slicer. 

How many plates can the magazine hold?

It is recommended to use up to 8 plates in the magazine. You can use more, but in this case we would recommend to keep an eye on the stack because misalignment can occur when the high plate stack bounces during the loading procedure. 

However, it's usually not necessary to have a large number of plates to operate a plate-changing system, even when printing large series. Unloaded plates can be cleared and returned to the magazine during the printing process. 

What can I expect purchasing this?

This accessory is a digital good. By purchasing this item you will receive access to print-files needed to build this addon. Licensing details can be found here.

The entire system works passively, which means no extra motors or other electronic parts are needed! All plastic parts needed for this add-on can be printed with PLA and PETG using your A1 printer. The only non printable parts you will need are following: 

  • 🧲 D10 x 3 mm Round magnets - x12 pcs.

  • 🔩 M3 x 10 mm Socket head screws - x5 pcs. (+6 pcs. for each plate)

Both components are standard parts and can be ordered in BambuLab's Maker's Supply store (matching magnets and screws) or easily sourced from your local supplier.

 

Is it difficult to build and set up?

No, it is actually a fun and easy to build project. Printing files will come with a detailed and well illustrated guidance which will help you to assemble the system within minutes. Before starting your first automated print-job you will run a short self-test to get sure that all components are assembled correctly and automation functionality works as expected. 

 

Do I need extra software?

To operate with JobOx A1, you will continue to use your usual slicer (BambuStudio and OrcaSlicer) with the difference that you will need to perform a short conversion of the sliced file using our web app before sending it to your printer. During conversion you can change the order in which plates are printed, the number of repeats and combine multiple files into a single queue.

This app runs as a website in any browser such as Firefox, Chrome or Safari and is available for online and offline use. There is no installation or subscription required. The conversion happens locally, so none of your data is leaving your computer. The application only acts as a converter, so it doesn’t need to run during printing. 

 

How can I get technical support?

We would like to emphasize that we do not provide personal technical support. However you will have a possibility to join our Discord server and ask the community. There will also be a troubleshooting guide on our website to help you find a solution. 

 

How safe is usage of such an accessory?

This automation add-on has been tested on thousands of plate changes on multiple machines to find and rework all possible sources of error. The current version works optimally but is not 100% perfect. There is still a certain risk of failure during loading and unloading, or due to side effects related to the use of the system. Mostly, this ends in the printer stopping due to an automated collision detection, and doesn’t cause any damage. However, it could theoretically result in damage to certain parts of your printer (most likely repairable) or your build plates (which is consumable and can be replaced). You should always be aware of this fact. Especially at the beginning you should keep an eye on your printer while using this add-on. 

While using this automation add-on a plate detection of your printer will possibly not work reliably! Please make sure to load enough plates into the magazine or refill it during its operation. 

 

Does usage of such an accessory affect my printer's warranty and certification?

Your printer warranty may be void if the printer is damaged by using this add-on. The Bambulab A1 manual states that nothing should be placed in front of or behind the printer. By using this add-on, you would act against this requirement and you would do it on your own responsibility. Also the continuation of the certification of such modified printers cannot be guaranteed either. Please be aware of this fact and your responsibility.



Does usage of such accessory affects my printer's warranty and certification?

Your printer warranty may be void if the printer is damaged by using this add-on. The Bambulab A1 manual states that nothing should be placed in front of or behind the printer. By using this add-on, you would act against this requirement and you would do it on your own responsibility. Also the continuation of the certification of such modified printer cannot be guaranteed either. Please be aware of this fact and your responsibility.

Disclaimer

This digital product is a third party acessory. Neither designer nor the distributor is affiliated with the company BambuLab.

Dimensions / specifications

All printed parts fits the A1 build plate.

Materials

Vollständige Details anzeigen
.

Associated products